Triton Velocigraph

TRITON is a seismic recorder with a built-in velocity sensor and a 24-bit AD converter.

Designed for durability and for data quality, it is available with several comunication options.

Triton gives you the ability to create a network of instruments with all channels synchronized acting like a single a multichannel device.

Triton is designed to suit different application and to satisfy every user need on the field.

 

Stand Alone geophysical or structural surveys

In this mode of operation TRITON acquires data as a simple recorder, stroring them on its memory or making them available on a miniSeed stream.

The user will decide if to interact with Triton in-site with a mobile/tablet or remotely.

 

 

 

 


Daisy Chain

Daisy Chain connection is intended for all the application where more devices are installed in-line and where it’s tough to guarantee enough sky view for GPS and there’s no local power supply.

 

 

Leveraging the daisy chain connection, TRITONMASTER, which will be guarantee GPS coverage and power supply, will synchronize and power-on all the installed instruments.

Due to the pass-through connection, each device can pass synchronism and power supply to the next one.

You can have TRITON configured according your needs

 

WiFi 2.4Ghz comunication radio module.

Thanks to the SoftAP function you can download data and you can configure your TRITON directly from your device (mobile, tablet, notebook), moreover you can create a network of multiple Lunitek devices completly wireless!


HSPA comunication radio module.

Insert a standard sim card inside your Triton and you can reach it from remote using a VPN.


Carrying handle, useful when using the instrument for dynamic tests, it makes transport easier!


TRITON is available with a professional carrying case

TRITON Velocigraph models available

Triton V : High Resolution Recorder combined with 4.5Hz or 2Hz high quality geophones​

Triton 1s : High Resolution Recorder combined with 4.5Hz high quality geophones and ad-hoc electronics to extend low frequency sensitivity down to 1s.​

Triton 5s : High Resolution Recorder combined with 2Hz high quality geophones and ad-hoc electronics to extend low frequency sensitivity down to 5s.​

Triton 30s : High Resolution Recorder combined with broadband seismometer. Response 30s -100Hz​

Triton 60s : High Resolution Recorder combined with broadband seismometer. Response 60s -100Hz​

Triton 120s : High Resolution Recorder combined with broadband seismometer. Response 120s -100Hz

Models are available in Triaxial, Biaxial or Monoaxial version

InputsDifferential
Channels3 low noise 24bit
Dynamic Range>136dB@100Sps
Sampling Rate10,100,200,250,500,1000 Sps
Sampling TopologySynchronous
Data FormatMiniSeed or Proprietary
TriggerSTA/LTA
TimingBuilt-in GNSS receiver
TimestampEncapsulated in data
LAN10/100 ethernet port
WiFiOptional built-in
Cellular ModemOptional built-in
Power Supply9-28Vdc – power consumption < 2W
Back up BatteryInternal LiPo
System Autonomy w/o external supply33 hours
ConfigurationWeb Interface
CompatibilityEarthworm,Antelope,Geopsy,SeiscomP and SeisGram2K
Weight2Kg
IP protectionIP68
Temperature Range-40°C to +70°C

* LiPo batteries can be discharged between -20°C to +70°C.
LiPo batteries can be charged between 0°C to +45C°.
If temperature drops or exceeds the charging/discharging limits the battery is inhibited.