Triton Seismograph

TRITON is a seismic recorder with a built-in velocity sensor and a 24-bit AD converter.

Designed for durability and data quality, it is available with several comunication options.

Triton allows you to create a network of instruments where the channels are all synchronized and act as a single multichannel device.

Triton is designed to suit various applications and provide a solution to the users needs in the field.

Stand Alone geophysical or structural surveys

In this operational mode, TRITON acquires data as a simple recorder, storing it on its memory or making it available on a miniSeed stream.

The user will then decide if they want to interact with Triton in-site with a mobile/tablet or remotely.

 

 

 

 


Daisy Chain

Daisy Chain connection is intended for all the applications where many devices are installed in-line and where guaranteeing enough sky-view for GNSS is difficult and there’s no local power supply.

 

 

Beneficting from the daisy chain connection, TRITONMASTER, which guarantees GNSS coverage and power supply, will then synchronize and power-up all the installed instruments.

Thanks to the pass-through connection, each device can pass synchronization and power supply to the next one.

You can have TRITON configured according to your needs

WiFi 2.4Ghz comunication radio module.

Thanks to the SoftAP function you can download data and configure your TRITON directly from your device (mobile, tablet, notebook), moreover you can create a network of completly wireless Lunitek devices


HSPA comunication radio module.

Insert a standard sim card inside your Triton and you can reach it remotely using a VPN.


Carrying handle, useful when using the instrument for dynamic tests, it makes transport easier


TRITON is available with a professional carrying case

TRITON Velocigraph models available

Triton V : High Resolution Recorder combined with 4.5Hz or 2Hz high quality geophones​

Triton 1s : High Resolution Recorder combined with 4.5Hz high quality geophones and ad-hoc electronics to extend low frequency sensitivity down to 1s.​

Triton 5s : High Resolution Recorder combined with 2Hz high quality geophones and ad-hoc electronics to extend low frequency sensitivity down to 5s.​

Triton 30s : High Resolution Recorder combined with broadband seismometer. Response 30s -100Hz​

Triton 60s : High Resolution Recorder combined with broadband seismometer. Response 60s -100Hz​

Triton 120s : High Resolution Recorder combined with broadband seismometer. Response 120s -100Hz

Models are available in Triaxial, Biaxial or Monoaxial version

InputsDifferential
Channels3 low noise 24bit
Dynamic Range>136dB@100Sps
Sampling Rate10,100,200,250,500,1000 Sps
Sampling TopologySynchronous
Data FormatMiniSeed or Proprietary
TriggerSTA/LTA
TimingBuilt-in GNSS receiver
TimestampEncapsulated in data
LAN10/100 ethernet port
WiFiOptional built-in
Cellular ModemOptional built-in
Power Supply9-28Vdc – power consumption < 2W
Back up BatteryInternal LiPo
System Autonomy w/o external supply33 hours
ConfigurationWeb Interface
CompatibilityEarthworm,Antelope,Geopsy,SeiscomP and SeisGram2K
Weight2Kg
IP protectionIP68
Temperature Range-40°C to +70°C

* LiPo batteries can be discharged between -20°C to +70°C.
LiPo batteries can be charged between 0°C to +45C°.
If temperature exceeds these limits, the charging process is suspended.